Touch-up Gel Coat Spray Gun

This gun is a one piece casting model and excels at surface touchups such as mold repair, composite refinish and delicate boat hull repair.

Cleaning is extremely easy and can be cleaned using acetone in just a few minutes.

Plastic or Aluminum cups can also be used for different color gelcoats instead of our exclusive graduated poly-pro cup. 

Blue die cast body ensures long life. 

G830-2.0 gun comes complete with a 2.0mm stainless steel nozzle, 0.12 liter cup and plastic material strainer. 

There are separate adjustments for spray pattern width and material volume. 

The 2.0mm nozzle is perfect for gel coat and resin.

For further details visit www.TOOLS4FRP.com

Smart Mat Cutter

Our Smart Mat Cutter has a thin base plate that makes it easier to cut complicated patters.

Its ultra slim and aerodynamic design increases working capacity and can cut up to 12mm (1/2”) thick stack of reinforcement.

Inbuilt sharpener grinds a new sharp edge for longer cutting life and the inbuilt air fan keeps the motor cool for longer shifts.

Handle cutter with great care. Do not drop it or handle it roughly as this will change its adjustments and may cause serious damage.

For more details visit www.TOOLS4FRP.com

Super Mat Cutter

Fiberglass Mat is one of the most popular forms of reinforcement for non-structural applications and requires special cutters to cut them.

Our Super Mat Cutter is cost effective to cut and pattern fiberglass materials such as woven roving, knitted fabrics, stich mat / fabrics, chop strand mat, CFM and other fibreglass textiles.

This tool has a base plate fitted with wheels for effortless movement and four sided high speed blade which can cut up to 25mm (1”) thick stack of reinforcement.

It also has an adjustable safety guard to limit blade exposure and a powerful 180 W motor for extreme cutting requirements.

For details visit www.TOOLS4FRP.com

Lambswool Roller

Lambswool Roller is made of wool piles that can hold and transfer ample resin on the laminate. 

It reduces multiple application of resin over fibreglass.

The material is of uniform thickness and density, hence is not affected by commonly used cleaning materials.

Replaceable refills are also available.
For more details visit www.TOOLS4FRP.com

HVLP Gel Coat Spray Gun 860 2.5

This full size professional grade HVLP gun comes complete with a 2.5mm stainless nozzle, 0.6 liter
plastic cup and plastic material strainer.

1, Plastic seal is resistant to acetone and other commonly used cleaners and emulsifiers.

2. You can also add a 1.0 liter aluminum cup.

3. It can be cleaned in acetone without the disintegration of the seal unlike other Gelcoat Spray Guns.

4. There are separate adjustments for spray pattern width and material volume.

5. This gun excels at large surface spraying, such as new mold construction, composite refinishing and large boat surface repair.

6. Blue die cast body ensures long life.

For details visit http://www.tools4frp.com/gel-coat-spray-gun/#g860-2.5

sphere core

sphere core is generally used as a thin core (to create bulk) or print blocker (liner) in fibre reinforced laminates, manufactured with Hand Lay-Up or Spray-Up processes.

sphere core mats should always be fully impregnated with resin.

It can replace much heavier solid glass layers thus having a weight saving of 60%.

One layer of sphere core builds up thickness rapidly and is available from 1 mm to 10 mm thickness.

For more details visit www.TOOLS4FRP.com

Teflon Finned Roller

Teflon Finned Rollers have some advantages over conventional metal rollers, which make them sought after. 

They are: 

Have excellent non-stick properties, which make them very easy to clean.

Are corrosion resistance, have high lubricity and low friction. These properties make the tool ideal when finish of part is most important.

Their smooth functioning and robust performance makes them highly durable.

For more details visit  http://www.tools4frp.com

Gel Coat Spray Gun G100-6

Gel Coat Spray Gun G100-6 is a professional grade sprayer designed for easy operation and is a must for every fibreglass shop-floor. Practical design of the gun helps spray faster than conventional HVLP guns.Cleaning is extremely easy and takes just a few minutes. Standard paper cups can also be used for different colour gelcoats instead of our exclusive graduated poly-pro cup.The key is our unique vacuum generation nozzles that allow for lateral and downward spraying.

G100-6 gun comes complete with a gelcoat nozzle (FN6 – size 4.7 mm), nozzle cleaning brush, cast aluminum lid, plastic cup liner, plastic and paper cup. Brass nozzles are CNC machined to perfection and are available in nine different sizes.

For details visit www.TOOLS4FRP.com

Barcol Impressor

Barcol Impressor is a portable, handheld, indentation hardness tester for rigid plastics like FRP and soft metals like aluminum, copper and other alloys.

Simplicity of the instrument makes it popular and can be operated with no prior experience. It can be used in any position and in any space that will allow clear reach for operator’s hand. Hardness reading is instantly indicated on the dial, which is divided into one hundred graduations. No waiting, pre-loading or separate measurements.

Simply exert pressure against the instrument to drive spring-loaded indenter point into the material. Indenter point must be perpendicular to the surface being tested. On very soft materials, the highest reading should be used since cold flow permits spring loaded indenter point to continue penetration.

Technical Parameters

Indenter	26 degree truncated cone, head face diameter 0.157 mm
Testing Range	0 ~ 100 HBa equivalent to 25 ~ 135 HBW
Resolution	0.5 HBa
Net Weight	0.5 kg

Calibration of Instrument

The zero point of the instrument is stable and seldom changes.

Collocation

1. Tester
2. Calibration Test Certificate
3. Standard Hardness Block (2 pcs)
4. Spare Indenters (2 pcs)
5. Calibration wrench
6. Carrying case

For more details click http://www.tools4frp.com

To purchase on line visit our store at Amazon.in

Finned Roller

Finned Roller is machined out of one-piece aluminum rod.

Fine and deep teeth like groves in radial direction help liberate air quickly.
This evenly designed roller is suitable for nearly all applications.

For more details visit www.TOOLS4FRP.com

Die Grinder

A die grinder, also known as a rotary tool, is a simple hand held power tool used for grinding, sanding, honing, polishing, or machining material (typically metal, but also plastic or wood).

The tool works by rotating a grinding nose at speeds measured in RPM or rotations per minute. The grinding mechanism makes use of an abrasive or a burr to smooth out or polish rough edges.

The air monitor and bearings uses compressed air to power the tools as the moisture in compressed air will rust the air motor, hence the motor should be lubricated daily but do not lubricate tools with flammable or volatile liquids such as kerosene, diesel or fuel.

The most universal safety precaution in die grinder use is to protect one's eyes by wearing safety glasses. Other common personal protective equipment to be used  in die grinder includes  safety gloves, face shield, ear plugs / head phones and simple paper masks.

When not in use tools should be cleaned fully assembled and then stored in a dry location to reduce rust.

For more details visit www.TOOLS4FRP.com

Wet Thickness Gauge

These Gauges are designed to quickly and easily measure the thickness of coatings immediately after they have been applied to a substrate.

Wet Film Thickness  gauges are also commonly known as: Combs, MIL Gauges, Step Gauges and Notched Gauges.

It measures the thickness of almost all types of organic coatings such as:

• Varnishes
• Lacquers
• Paints
• Resins
• Gel coats
• Enamels

It can also be used to measure powder coating thickness before it goes through curing. Wet film thickness is measured to determine the correct dry coating thickness.

A wet film thickness gauge is especially valuable for evaluating the coating when working with a new finishing system or for calibrating new spray equipment.

The drawing indicates that tooth marked 3 mils is covered with the wet paint and tooth marked 4 mils is not covered. This indicates that the true wet film thickness of the material is between 3 and 4 mils thick.

It comes under three variations:

1. Single use Wet Fim Gauge
2. Multi use Wet Film Gauge
3. Wet Laminate Gauge

Single Use Wet Film Gauge:

It is made up of plastic and measures up to Mils 2-36 / Micron 50-900
Triangular shape allows more measurements per edge
Holes allows label attachment

Multi Use Wet Film Gauge:

It is made up of Aluminium and is a Dual scale gauge, measuring up to 80 Mils on side #1 and from 25 to 2032 Microns on side #2
It is Pocket sized at 2¼” – 3¼” and is easily portable
Teeth or notches are machined into the sides of the gauge

Wet Laminate Gauge:

It is made up of Anodized Aluminium with Steel Lock for repeated usages
Measures up to 1″ of thickness
Its graduated cylinder makes it uncomplicated in taking readings.

For more details visit www.TOOLS4FRP.com

Scissors - NOT JUST a hand-operated shearing tool…

Scissors are hand-operated shearing tool. Simple and enough said…

Why does barber goes to great length and fine detailing to select his scissors or a tailor is so personal about his hand-operated tool and shall select only a finely engineered scissors. 

Why???

                Because…an incorrect scissor will result in increased damages!

TOOLS4FRP brings you the world finest scissor made with time-tested Japanese engineering especially designed for shearing hard material like fibreglass, carbon and Aramid (Kevlar).

Scissors are hand-operated shearing tool

 Few of the salient features are as follows:

1. Blades are made with special high-carbon Molybdenum Vanadium stainless steel helping in extra-long edge life and high cutting efficiency.

2.    Full-length blade-to-grip design helps to maintain optimum cutting balance.

3.    Interlock screw are engineered to provide long lasting blade tension.

4. Elastomeric padded grip on the handle takes care of comfort and ease in long operations.

For more details, please visit www.TOOLS4FRP.com

Catalyst Dispenser

MEKP - catalyst for polyester resin systems, being very explosive, should be handled with the utmost care.

Slight change in ratio will either leave parts uncured or reaching the exhotherm (cure) too fast.

Precise measurement of catalyst is out most important.

These unique, graduated bottles are designed just for that.

For more details visit www.TOOLS4FRP.com

Demoulding Wedges

Please… stop using metal screw drivers, chisels or any other harsh object for demoulding your parts. Such sharp metallic objects will destroy your precious mould surface beyond repair.

Use our demoulding wedges made with polymer material that will not scratch or damage mould surface and shall extract the part effortlessly.

Another innovation, Air Injected Wedge is designed to deliver air all the way to the sticking point to provide pressure where it is needed most. Simply insert the wedge and attach air pressure to the inlet.

For more details visit www.TOOLS4FRP.com