Happy New Year 2018

Merry Christmas and A Happy New Year 2018

Rollers are cost effective

Do you know ? Rollers are productive.

Still using Brushes ?

Reversible Drill, D - 31

Angle Air Polisher, S-74

Air Body Saw B - 12

Gelcoat Spray Gun G100 - 6

Wheel Cutter

Wheel Cutter

• Equipped with 45 mm dia. tungsten steel blade
• Soft padded handle assists in free hand movement
• Auto exposure guard for complete protection
• Ideal for veils, light weight cloth and fabrics

Clearance Sale

It is not every day that we are able to offer our customers substantial discounts. 
We are extremely happy to announce a special discount of 35% on orders of following products. These sizes are being discontinued. Hence the offer is limited to available stock only. 

• GST additional as applicable
• Minimum order of 20 pcs per product
• Offer valid till stocks last
• Freight charges are additional on above Discounted Price.
• All other commercial terms and conditions remain unchanged.
Please take advantage of this bargain.
We look forward to your valued business.
Visit us at http://www.tools4frp.com/

Catalyst Dispenser

Catalyst (MEKP) for polyester resin systems, is the most sensitive and critical ingredient. Its incorrect ratio can seriously hamper quality of our FRP parts.

Exact measurement of catalyst is very important. Slight change in catalyst-to-resin ratio will either leave parts uncured or exotherm (cure) will reach too fast.

Understanding significance of precise measurement of catalyst, tools4frp have launched a new version of Catalyst Dispenser,that can accurately measure even ½ ml.

Maximum capacity of the measuring cylinder is 15 ml and storage bottle is 500 ml.

For more details visit www.tools4frp.com

Resin Squeegee

Resin Squeegee ensures that resin has been thoroughly and evenly distributed.

As they are pushed along the surface of your wet lay-up, they help to: • Push excess resin out of the lamination, preventing brittleness in a finished part
• Improves fiber-to-resin ratio as it picks up excess resin
• Eliminate air pockets trapped between layers of reinforcement
• Push the resin into reinforcement and dry areas that might have been left
• Improves strength properties of the reinforcement by curing all the dry areas

Size available is 7” wide

For more details visit www.tools4frp.com

Bristle Roller

Bristle Roller consists of a spirally wound metal core onto which bristles are embedded and can penetrate into the laminate to remove and buster air bubbles whilst producing a very effective consolidating action.

• Removes air much faster than a brush. 
• Works well for knitted/unidirectional/multi-axial fabrics. 
• They are very effective for irregular surfaces.

For more details visit www.tools4frp.com

PROLON Semi Permanent Release System - Success Story

We would like to share success story of our Semi Permanent Release System. We had launched this product in January during ICERP 2017. It is also our contribution to the “Make In India” initiative.

Release agents are an Integral part of manufacturing process. However, rarely understood for the value they can add.

Our customers who believed and took up Prolon for day-to-day production, really appreciated and shared valuable inputs on “How Prolon helped them?”:

1. Enhanced Productivity

2. Extended Mold Life

3. Increased Cycle Time

4. Improved Part and Surface Quality

5. Reduced Scrap and Defect Rates

6. Economical to Buy and to Use 

Continuing to pass on benefits, I am pleased to announce price reduction post-GST. We believe it illustrates our commitment towards outstanding value and high quality product with competitive pricing. Prices have gone down up to 15%.

We appreciate your business and look forward to serving you in the future.

Digital Thickness Calliper

Aristotle once said, “Quality is not an act, it is a habit”

We believe this habit becomes behaviour, and behaviour turns into culture. Therefore, keeping this culture of quality alive across our industry, TOOLS4FRP always bring reliable products and solutions to keep check on quality.

We are glad to announce our new product for quality checking “Digital Thickness Calliper”. You can make quick and accurate measurements with this high quality digital calliper. The large LCD display makes reading a breeze, and the readings can be set for inch, metric or fractional measurements. It also has important and convenient hold function. Perfect for checking thickness of FRP laminate, OD of Pipes, etc. 

This tool overcomes the biggest shortcoming for quality managers. It can measure thickness of part up to 15 cm inside of periphery.

Features: 

·         Large LCD display 

·         Spring-Loaded travel 

·         Alloy Jaws, Chrome finish 

·         Easy move/lock system

·         Three way reading i.e. 0.01”, 0.1mm, 1/64” 

·         Hold Function 

·         Measure up to 8" 

·         Accuracy 0.01”

·         Battery Life: Up to 1 Year 

Thanks once again for your continuous support and encouragement, it keeps us going. 

Mixing Sticks

Our Steel Resin Mixers are excellent for mixing all types of resins and gel coat. These can be used instead of wooden stirrers to avoid any type of contamination.

Features and Benefits

·         Various sizes suitable for 10 - 70kg mix batch
·         Fits standard 1/2” drill chuck
·         Easy to clean up with acetone
·         Professional grade
·         Minimizes the introduction of air into the mixture
·         Unique design does not damage the mixing container
·         Comes in three different sizes (Small, Medium and Large)

For small batches, Bucket Resin Mixer is a handy tool for mixing catalyst with resin at time of moulding.

For more details visit us at http://www.tools4frp.com

Corner Roller

Rollers improve productivity while ensuring quality FRP products.

Quicker selection and even resin wet out makes roller a favored tool.

Removes air bubbles without squeezing out the resin that could cause starvation.

Even thickness through out the product can be achieved. 

Controls resin consumption and hence saves a lot of money on a continuous basis. 

Our Corner Roller is for edges and fillets where flat rollers are ineffective.

For details visit http://www.tools4frp.com/special-purpose-rollers/

Sanding Block

Sanding Block…Why? We can just fold a piece of sandpaper and go to work.
But, you'll get better results with far less effort if you use a sanding block. 
The block distributes sanding pressure evenly and maintains a flatter surface.
For the ultimate in hand-sanding convenience and efficiency, consider ordering a sanding block like the one we show here. 

Its shape conforms comfortably to your hand, and the well-designed clamps make it easy to install sheet of sandpaper.
Sizes available are 5” and 9” rubber.For more details visit www.tools4frp.com

Wheel Cutter

Scissors are hand-operated shearing tool. Simple and enough said…

Why does barber goes to great length and fine detailing to select his scissors or a tailor is so personal about his hand-operated tool and shall select only a finely engineered scissors. Why???

Because… an incorrect scissor will result in increased damages!

TOOLS4FRP brings you the world finest wheel cutter made with tungsten steel blade especially designed for cutting cloth, vinyl, paper, film etc.

For more details, please visit www.TOOLS4FRP.com

Wet Laminate Gauge

An accurate, reliable, long lasting and economical tool for measuring thickness of wet resin-fibreglass layup.

 It can measure up to 25 cm thickness. The tool is made of anodized aluminum with steel lock for repeated usages. Light weight and very handy for easy operations. Its graduated cylinder makes it uncomplicated in taking readings.

For more details visit www.TOOLS4FRP.com

Angle Air Polisher

Buffing and polishing involves changing the surface by slightly rubbing minute top layers. This action removes subtle damage that lies just beneath. It helps in smoothing the surface by using a rotary tool and a versatile polish to achieve high gloss.

Angle Air Polisher is used just for that covering a wide range of surfaces – FRP, paint, metal and plastic to a high-gloss professional finish. It weighs 2900 grams and comes with a high free speed of 2,500 rpm.

For more details visit www.TOOLS4FRP.com

Semi-Permanent Liquid Release System

Release agents provide the critical barrier between a molding surface and the substrate, facilitating separation of the cured part from the mold. Without such a barrier in place, the substrate would become fused to the mold surface, resulting in difficult clean-up and dramatic loss in production efficiency.

This Semi-Permanent Liquid Release System is designed to increase the performance of fibre-glass plastic production by forming a cross-linking durable coating on the mold's surface providing multiple releases, hence greatly improving the manufacturing ease and economics. It is easy to use and have no CFC. The system is followed by

L-455 (ReleaseAgent)

In most cases, a single application provides releases through numerous multiple cycles
Optimal drying

Provides a glossy finish to the surface

Highly versatile and can be used on all mold surfaces

  

S-725 (Sealer)

Removes the porosity present in the mold

Provides protection to mold and enhances the performance of the mold release

No build-up on molds and dies

CLR-500 (Cleaner)

Removes any traces of wax, release agents, sealers and buffing compounds

For more details visit www.TOOLS4FRP.com

Laminate Cutter

Laminate Cutter is a versatile, light-duty cutter for cured frp 

laminates, fibercement siding, vinyl flooring and much more.

It has a cutting capacity of 7.5 mm with a free speed of 10 mm.

The cutting wheel dia is 73 mm and the overall length of 250 mm.

For more details visit www.TOOLS4FRP.com

Air Body Saw

From the most demanding cutting applications to everyday requirements, an air saw is needed to get the job done quickly. 
Specially designed piston air-motors require a low air volume while maintaining a high cutting speed under load. 
Light in weight and can cut intricate shapes and curves. 
Being pneumatic keeps the vibration and noise low and hence the bonding of fibreglass and resin does not loosen up.
Some of the silent features are:
* Sturdy cast steel and aluminium saw body
* Low air volume - only 4 cfm is required
* Upto 9000 strokes per minute
* Safety STOP/Isolator button disconnects air supply easily
Comes in two variants B-12 and B-13 (Heavy Duty)
To view more details about the same visit us athttp://www.tools4frp.com/air-tools/#air-body-saw