Sanding Block

Sanding Block…Why? We can just fold a piece of sandpaper and go to work.
But, you'll get better results with far less effort if you use a sanding block. 
The block distributes sanding pressure evenly and maintains a flatter surface.
For the ultimate in hand-sanding convenience and efficiency, consider ordering a sanding block like the one we show here. 

Its shape conforms comfortably to your hand, and the well-designed clamps make it easy to install sheet of sandpaper.
Sizes available are 5” and 9” rubber.For more details visit www.tools4frp.com

Wheel Cutter

Scissors are hand-operated shearing tool. Simple and enough said…

Why does barber goes to great length and fine detailing to select his scissors or a tailor is so personal about his hand-operated tool and shall select only a finely engineered scissors. Why???

Because… an incorrect scissor will result in increased damages!

TOOLS4FRP brings you the world finest wheel cutter made with tungsten steel blade especially designed for cutting cloth, vinyl, paper, film etc.

For more details, please visit www.TOOLS4FRP.com

Wet Laminate Gauge

An accurate, reliable, long lasting and economical tool for measuring thickness of wet resin-fibreglass layup.

 It can measure up to 25 cm thickness. The tool is made of anodized aluminum with steel lock for repeated usages. Light weight and very handy for easy operations. Its graduated cylinder makes it uncomplicated in taking readings.

For more details visit www.TOOLS4FRP.com

Angle Air Polisher

Buffing and polishing involves changing the surface by slightly rubbing minute top layers. This action removes subtle damage that lies just beneath. It helps in smoothing the surface by using a rotary tool and a versatile polish to achieve high gloss.

Angle Air Polisher is used just for that covering a wide range of surfaces – FRP, paint, metal and plastic to a high-gloss professional finish. It weighs 2900 grams and comes with a high free speed of 2,500 rpm.

For more details visit www.TOOLS4FRP.com

Semi-Permanent Liquid Release System

Release agents provide the critical barrier between a molding surface and the substrate, facilitating separation of the cured part from the mold. Without such a barrier in place, the substrate would become fused to the mold surface, resulting in difficult clean-up and dramatic loss in production efficiency.

This Semi-Permanent Liquid Release System is designed to increase the performance of fibre-glass plastic production by forming a cross-linking durable coating on the mold's surface providing multiple releases, hence greatly improving the manufacturing ease and economics. It is easy to use and have no CFC. The system is followed by

L-455 (ReleaseAgent)

In most cases, a single application provides releases through numerous multiple cycles
Optimal drying

Provides a glossy finish to the surface

Highly versatile and can be used on all mold surfaces

  

S-725 (Sealer)

Removes the porosity present in the mold

Provides protection to mold and enhances the performance of the mold release

No build-up on molds and dies

CLR-500 (Cleaner)

Removes any traces of wax, release agents, sealers and buffing compounds

For more details visit www.TOOLS4FRP.com

Laminate Cutter

Laminate Cutter is a versatile, light-duty cutter for cured frp 

laminates, fibercement siding, vinyl flooring and much more.

It has a cutting capacity of 7.5 mm with a free speed of 10 mm.

The cutting wheel dia is 73 mm and the overall length of 250 mm.

For more details visit www.TOOLS4FRP.com

Air Body Saw

From the most demanding cutting applications to everyday requirements, an air saw is needed to get the job done quickly. 
Specially designed piston air-motors require a low air volume while maintaining a high cutting speed under load. 
Light in weight and can cut intricate shapes and curves. 
Being pneumatic keeps the vibration and noise low and hence the bonding of fibreglass and resin does not loosen up.
Some of the silent features are:
* Sturdy cast steel and aluminium saw body
* Low air volume - only 4 cfm is required
* Upto 9000 strokes per minute
* Safety STOP/Isolator button disconnects air supply easily
Comes in two variants B-12 and B-13 (Heavy Duty)
To view more details about the same visit us athttp://www.tools4frp.com/air-tools/#air-body-saw